Best Drone Lipo Battery Chargers

Best Drone Lipo Battery Chargers

The Best Drone Lipo Battery Chargers?
Since all of our quadcopters and fixed wing aircraft run on electric power we, (my Dog and cat), thought making this blog and as always; agreed.
Having a decent battery charger is very important to ensure your batteries last a long time and you get the most out of them.

Beginners guide to charging LiPo batteries + parallel charging

Some quick little tips to help people out there when it comes to charging Lipo batteries.

I know there can be a lot of numbers and things to understand when it comes to batteries and it is important to get them right because Lipos can be dangerous in used incorrectly.

Happy flying everyone.

If you found this helpful leave a like so can help other people too.

Like what I do.

Support and help me grow the channel at every little bit helps and will allow me to make more videos like this more often.

Big thanks to the people who already do support the channel. You guys rock.

Happy flying EDIT:

I accidentally said miliamp hours instead of amp hours at points in the vid, But im sure you get the idea : )


If you’re using this charger (Turnigy Accucel-6 80W) to charge fat shark batteries you’ll need to upgrade the firmware of this charger!

You can’t balance charge fat shark’s batteries so you’ll end up with an error by default.

Here’s the link to the firmware:… Download “ACC6 80W firware v1.13 patched to fix balance connect error” and follow the instructions inside!

LiPo Battery Charger Roundup

In this video roundup, I compare several LiPo chargers from the Reaktor line and others to see how they stack up against each other. This is not so much a review, as an analysis of the specifications of each charger, to help you decide which one might best fit your needs.

This video is a culmination of a series of videos on how to analyze battery charger specifications.

This is an amaZing playlist; here:…

Chargers in this review are:
    1. Turnigy Accucel-6 80W
    2. Reaktor 250W 10A 6S
    3. Neutron 200W 10A 6S HV Touchscreen
    4. Reaktor 300W 20A 6S
    5. Reaktor 300W 20A 6S AC/DC
    6. Reaktor 2x 300W 20A 6S
    7. Reaktor 1000W 30A 6S
    8. Reaktor 4x 300W 20A 6S
    9. iCharger 308 Duo

A small addendum on what I said in the video:

In the video, I said that the QuadKore charger might be good if you just hated parallel charging. That’s not right. The QuadKore charger is 300 watts per channel, which is probably WAY more than most people are going to need to charge a single battery at 1C or 2C. These people could buy seven !!! Accucel-6 80 watt chargers for the price of the QuadKore and probably charge their small batteries even faster. The QuadKore is ideal if you need 4x 300 watts. This is likely to mean that you are charging very big batteries, 6S batteries, or you are parallel charging. If you need to charge a lot of small batteries, a lot of small chargers may be a better choice.

The Quick Answer

Beware of Scammers Please Contact Only through My Email I think is the best budget duel 4s lipo charger you can get at the moment at only 25 bucks. This is absolutely insane. HTRC H4AC DUO…

The tool i used to measure balancing:…

FrSky Q X7:…

Batteries I use:…

Standoffs I find to be the best:…

Xt60 Premade I use:…

Heat shrink I mentioned:…

Soldering station:…

ISDT’s biggest charger yet! The iSDT T8 is 306 grams and can charge up to 1000W at 35A and from 1 – 8S batteries. Probably the best iSDT Lipo bench and field charger to date.

Find iSDT chargers and AC Adapter links below :

ISDT T8 1000W 35A Portable/or Bench Battery Charger here :

ISDT Q6 Plus Portable Battery Charger here:

ISDT SC-608 Portable Battery Charger here :

ISDT 150W AC Adapter for plugging into US AC Outlets here:

iSDT SC – 620 500W 20A Balance Charger here:

iSDT D2 Dual Port 200W Smart Balance Charger here:

iSDT PC – 4860 1 – 8S Safe Parallel Charging Board:

Generic Parallel Charge Board here:

Radio of choice TARANIS X7 by FrSky here :

Economy priced 4S 1300mah battery here:

Favorite 5″ racer quad props / Emax AVAN Tri-Props:

Drone landing pad of choice here:

Fatshark HD3 Goggles  / Use the code / RC18OFF:

Economy $50 pair googles w/ two diversity antennas:


Here’s a look into the Batteries that i prefer to use and also a look at my charging setups and a little miscellaneousness around my shop including my soldering Iron and all of Chad’s crap.

Follow Mr. Steele’s Gear YouTube Producer at These URLS Below:


Bottle Flipping Gear / Most gnarly bottle water ever:

_ Kwad Gear _ :
– Impulse RC Alien 5″/RR5 –
– TBS Mr Steele Motors –
– KISS FC/Flyduino KISS Flight Controller
– KISS 24A ( D shot )
– HQ 5040X3(Yellow) – Runcam Swift (camera tilt 25°) –
– (2.5mm lens)
TBS Core PNP50
– TBS Triumph CP antenna
– TBS Unify Pro 800mW VTx
– ThunderPower/Adrenaline /1300 4S:
– GoPro Session5 –
– Stick on Lens protector Must HAVE!
– ALL UP WEIGHT – 576g –

7 Best LiPo Chargers 2017


Please Note:
Our choices for this wiki may have changed since we published this review video. Our most recent set of reviews in this category, including our selection for the year’s best lipo charger, is exclusively available on Ezvid Wiki.

Lipo chargers included in this wiki include the hitec 44167 x4 ac plus, skyrc imax b6ac, tenergy tb6-b, ev-peak r1, venom pro duo, ultra power up120ac, and traxxas 2970 ez-peak plus.

Lipo chargers are also commonly known as lipo battery chargers.

You NEED One of These!
LiPo Safety Bag RC Drone, Truck, Car & More!
HobbyTiger – TheRcSaylors

Check out these Great LiPo Safety Bags here: Be sure to change the options to select Double Sided if desired. With all the new RC Drones, Quadcopters, Cars,

Trucks, and more:

Hitting the market, and so many new pilots and drivers out there, it’s time to start thinking about safety while charging you batteries. Not only charging, but storing, transporting, and even discharging them it’s important to think about safety.

LiPo Batteries:

These are wonderful products when used properly and safely, but even when used perfectly, they can still fail! We’ve seen it happen too many times to fellow RC people around the world.

The LiPo bag:

These bags are not a gurantee, but definitely something you really Should have if you intend to enjoy this hobby. We’ve stumbled across a great company that makes a very high quality double sided bag that can stand up to a TON of heat.


Manufacturers/Company  Claim:

1,000 Fahrenheit in fact. Of course we aren’t able to test those temperatures safely but we want to show you a real example of this bag to an open flame. Please, do not try this at home! Never leave your charging batteries unattended and please, Be Safe!! Buy these great

You Can get LiPo bags here – I
Information from manufacturer:

These bags are made of super strong fire retardant fiberglass nylon and will stand very high temperatures for a reasonable period of time. The bags are stitched together with an extremely strong fire retardant thread and the flap is secured in place with hook and loop tape. HOBBYTIGER upgraded logo is made of durable seams sewn by craftsmen instead of being printed on the bag like before. Ideal as a LiPoly charging bag, but superb for encasing your battery if the untoward ever happens.

7total visits,4visits today

Leave a Reply

Your email address will not be published.